How do you calculate the weight of a TMT rod?

How do you calculate rod weight?

If we put 1 meter length for each diameter of steel bar in the formula then we will get the unit weight.

  1. 6 mm ø bar = 6² x 1/162 = 0.222 kg/m.
  2. 8 mm ø bar = 8² x 1/162 = 0.395 kg/m.
  3. 10mm ø bar = 10² x 1/162 = 0.617 kg/m.
  4. 12mm ø bar = 12² x 1/162 = 0.888 kg/m.
  5. 16mm ø bar = 16² x 1/162 = 1.580 kg/m.

What is the weight of 1 TMT bar?

TMT Steel Weight Chart :

Diameter No of Rods Weight
12 MM 5 Rods 52 KGs
16 MM 3 Rods 55 KGs
20 MM 2 Rods 60 KGs
25 MM 1 Rods 46 KGs

How do you calculate the weight of a steel rod in KG?

Multiply the total length of bar with the following unit weight. For, 10mm ø bar = 0.188 kg/ft. 12mm ø bar = 0.270 kg/ft.

  1. 10mm ø bar = 0.617 kg/m.
  2. 12mm ø bar = 0.888 kg/m.
  3. 16mm ø bar = 1.580 kg/m.
  4. 20mm ø bar = 2.469 kg/m.
  5. 25mm ø bar = 3.858 kg/m.
IT IS INTERESTING:  What is the standard mesh size of a fish net?

What is the weight of 12mm reinforcement bar?

Comparison List of Deformed Steel Bar Size and Weight:

SIZE (Diameter) THEORETICAL WEIGHT KG/M
10mm 0.62
12mm 0.89
14mm 1.21
16mm 1.58

What is the weight of 8mm rod?

Calculate the weight of the TMT rods in bundles as per size.

TMT Size TMT Rods Per Bundle TMT Weight Per Bundle
8mm (1 Bundle) 10 47 Kg
10mm (1 Bundle) 7 53 Kg
12mm (1 Bundle) 5 53.4 Kg
16mm (1 Bundle) 3 56.88 Kg

How do you find unit weight?

Unit Weight of steel is defined as ratio of weight of steel to its unit volume, weight of Steel measured in kilogram (kg) and its volume is measured in cubic metre (m3), then its unit weight = unit mass/unit volume, represented as W = m/V, where W is Steel unit weights, m for mass and V for volume, it is also known as …

How do you calculate unit weight of steel bars?

The unit weight of steel bar is calculated by dividing the weight of the steel bar by its volume. For calculating the unit weight of steel bars consider the unit length of 1 meter for all steel diameter steel.

What is weight of 6mm Rod?

6mm tmt bar weight: weight of 6mm TMT bar is 0.220 kgs per meter, 2.67kgs per piece and 53.33 kgs per bundle.

How do you calculate steel weight in feet?

HOW TO CALCULATE WEIGHT OF STEEL BARS IN FEET

  1. Is the formula to calculate the weight of steel bars in KG/ft.
  2. So the weight of 10 mm bar will be,
  3. (10 x 10) / 533 = 0.188 kg/ft.
  4. To be accurate W= D2/533 it is.
  5. Its is derived from the very basic concept.
  6. density of steel in meter =7850 kg/m3 > 7850/(1000X1000X1000) kg/mm.
IT IS INTERESTING:  Your question: How many calories are in deep fried fish?

What is weight of 12mm steel rod?

12mm rod weight:- 12mm rod supplied in U shaped bent or straight, a length of about 12 metres or 40 feet, generally 12mm rod weight around 10.667kg/ piece, 0.889kg/m or 0.270 kg/foot.

How do you calculate rebar weight in kg?

W= (D2/162.28)* L

Where ‘D’ and ‘L’ are the diameter and the length of the rebar respectively. Take the value of diameter in terms of millimeter and length in terms of meters. You will get the results in kilograms (Kg). After dividing the results with the actual length of rebar you can get the weight per meter run.

How do you calculate the weight of a 12mm steel bar?

12mm dia bar = (12x12x1)/162.28 = 0.8874kg.

How do you calculate the number of reinforcement bars?

How to calculate number of steel bars in column

  1. Put that percentage of steel and Gross area of column in Load formula.
  2. Determine the permissible stress in steel in compression.
  3. Calculate Area of Steel required.
  4. Calculate No. Of bars = (area of steel÷area of a single bar).