How deep should closet rod be?

You can avoid this clothing disaster by mounting the rod at least 12 inches from the rear wall of the closet. Keep in mind that the average closet has a depth of 24 inches.

How deep is a closet rack?

Closet shelves are NOT one size fits all. Ideally, they should be a variety of depths based on what each section needs to store. Builders commonly put in shelving that is 11 ¼” deep.

How much space should be between shelf and closet rod?

A minimum of 10 inches is best, but it’ll depend on the size of your hangers. If there is a shelf above the rod, determine the vertical distance from the rod to the shelf; two inches should be suffice.

What is the best closet depth?

The comfortable recommended depth of a closet is 24” (61 cm), but closet depths as narrow as 20” (50.8 cm) can be used if desired. Shelf depths of 12” (30.5 cm) should be used for shoes and smaller clothing elements.

How deep should closet cabinets be?

As always, you want to make sure you’re getting the best possible storage solution for your personal wardrobe. The depth of your closet cabinets and panels range from 14 inches to 24 inches. Most clothing items that are hung, including dress shirts and blouses, jackets and coats, will fit inside a 22-inch-deep area.

IT IS INTERESTING:  How do fish exchange gases?

How thick is a closet rod?

A closet-rod dowel is usually between 1 1/4 inches to 1 3/8 inches in diameter. This diameter allows for plenty of hanging strength. It resists breakage, and will not bend when properly supported. These dowels are most often hung between two round wall brackets secured to the wall with screws and drywall anchors.

How shallow can a closet be?

The standard minimum depth for a reach-in closet is 24 inches, but a closet intended to store coats or other bulky hanging items may need to be as deep as 28 inches. A closet less than 22 inches deep isn’t deep enough to allow hanging clothes.

What is the strongest closet rod?

Closet rods made from steel are chrome plated. In addition to being the strongest, they are also very resilient. Even after being overloaded they are likely to spring back to their original shape due to the resilient quality of steel.

How far from the wall should a closet rod be?

For a single rod application, plan 60-inches from the floor for placement. You will need at least 1-foot, 9-inches (24-inches is standard) away from the back wall for hanging. When spanning an opening of more than 48-inches, consider adding a center support to the closet rod for added stability.

How deep should walk-in closet shelves be?

The standard walk-in closet shelf depth is 12 inches, which happens to match the standard depth of kitchen cabinets. If you plan to keep shoes on a one-foot shelf, you may need to install a special shoe rack. If your shoes are too big to fit flat on the shelf, use a sloped rack.

IT IS INTERESTING:  Is fishing for food cruel?

How deep should drawers be?

Drawer depth or height is not critical, but the most common difference between the drawer and the opening is 3/4 inch. For example, if the opening measures 4 inches vertically, the drawer should be built 3 1/4 inches. This allows 1/4 inch at the bottom where the slide is attached, and 1/2 inch at the top for clearance.

How deep should a floating shelf be?

For example, if you are floating a bookshelf, typically your shelf won’t need to be deeper than 10″ since most books are less than 9″ deep. If you are floating kitchen shelves, 12″ usually works since most cabinets and the plates, cups, and bowls they house, are 12″ or less deep.

How deep are base cabinets?

The depth measurement is taken from the front outer front edge of the cabinet to the wall. Stock base cabinets are generally 24 inches deep (not counting countertop overhang). Deeper base cabinets make it difficult for you to reach the back of the counter or to plug-in appliances.